melting temperature
英 [ˈmeltɪŋ ˈtemprətʃə(r)]
美 [ˈmeltɪŋ ˈtemprətʃər]
解链温度，变性温度；熔融温度；塑化温度
双语例句
- Determine the relationship between the measured variability of gene expression in one or more data sets and the variation of the melting temperature within a probe set.
确定在一个或多个数据组的基因表达变化和探针装置内部溶解温度变化之间的关系。 - When the size of nanocrystals reaches its minimum, the melting temperature of the nanocrystals reaches its lowest value and the corresponding melting entropy is zero.
当纳米尺寸达到其最小值时，熔化温度达到最低并伴随着熔化熵的消失。 - Gas cylinders are protected from rupture due to fire by a frangible disc sometimes backed by a fusible metal with a melting temperature of about212F ( 100C).
用破裂盘，有时后候后面还有一个熔化温度为212F（100C）易熔金属，来保护气体钢瓶，防止由于起火而破裂。 - When one reaches the melting temperature, particles break free as the material melts away.
当一个到达熔点时，物体熔化的同时粒子自由破裂。 - After blending with the functional master-batch, the melting temperature and spinning temperature were correspondingly higher than pure PA6 chip.
功能母粒与PA6切片共混后的熔融温度及纺丝温度比纯PA6切片的相应温度高； - Influence of MgO and Li_2O on Melting Temperature of Free Fluoride Premelted Continuous Casting Mold Fluxes
MgO和Li2O对预熔型无氟连铸保护渣熔化温度的影响 - Effect of Fluxing Agent B_2O_3 on Melting Temperature of CaO-Based Refining Slag
B2O3作助熔剂对CaO基精炼渣系熔化温度的影响 - The yield, molecular weight, polar comonomer content and melting temperature of the poly ( olefin-ester) s can be controlled by the change of polymerization reaction condition.
改变聚合条件，可控制烯烃共聚酯的分子量、极性单体插入率和熔融温度等性质。 - There is no effect of the melting temperature on the compressibility of the thawed soil.
融化温度对融土压缩特性基本无影响； - Influence of Water Content, Melting Temperature and Content of Hydrochloric Acid on the Synthetic Yield of Glyphosate
水分含量、脱熔温度和盐酸量对草甘膦合成收率的影响 - Calculate the distibution of the melting temperature of the oligonucleotide probe sets that Affymetrix uses for its microarrays.
计算用于微阵列的基因表达谱、和基因分型研究技术平台使用的、低聚核苷酸探针装置的溶解温度分布。 - The influence of fly ash on partition characteristics of heavy metals before and after melting treatment was studied, including the melting temperature, melting time and the basicity.
对城市垃圾与煤混烧飞灰进行旋风熔融试验，分析了不同熔融温度条件下熔渣的微观形貌及重金属行为。 - This paper studied the melting characteristics of binding phase in high-basicity sinter and got the relationship between the melting temperature and binding phases composition.
本文以高碱度烧结矿中的铁酸盐黏结相为研究对象，考察了黏结相的熔化特性随黏结相组成的变化规律。 - It is emphatically expounded the effects of vanadium, titanium, silicon and sulphur on viscosity, melting temperature and solidifying point of liquid iron.
简介了所采用的测试研究方法，着重论述了钛、钒、硅、硫单因素及其综合因素对铁水粘度、熔化性温度和凝固点的影响。 - Influence of Additives on Vitrified Bond Melting Temperature of CBN High-speed Grinding Tool
添加剂对CBN高速磨削工具用陶瓷结合剂熔融温度的影响 - Finally, the surface of this meteorite melted lump of metal spots there may be landed during the metal melting temperature in stone surface.
最后，这块陨石表面还有金属熔化的块状斑点，可能是降落过程中的高温使金属熔化在石头表面。 - Effect of Ag and Ni on melting temperature and spreadability of Sn-SbCu solder alloy
Ag和Ni元素对Sn-Sb-Cu无铅钎料熔化温度和铺展性能的影响 - The melting temperature and enthalpy was increased and the modified starch showed more thermal stable.
淀粉的熔融温度提高，焓值增加，抗性淀粉的耐热性更好。 - Prediction of melting temperature of DNA duplex by least squares support vector machine
双链DNA解链温度的最小二乘支持向量机预测方法 - The control of production technology parameters is difficulty due to high melting temperature of borosilicate glass and volatility of boron.
高硼硅玻璃由于熔化温度高、硼易于挥发等原因，在实际中难于操作控制。 - The results showed that the melting temperature change was smaller compared with pure PA6 chip, but the melt flowing property of the functional master-batch became poorer.
结果表明：与纯PA6切片相比，功能母粒的熔融温度变化较小，但流动性能变差； - In addition, jewelry alloys used in wax setting and casting must have the properties of low melting temperature, good fluidity and anti oxidization properties.
用于蜡镶铸造的合金应具有较低的熔点、较好的流动性及抗氧化性能等。 - Rather, it is a mixture of a large number of different substances, each with a different melting temperature. fuse or cause to grow together.
相反它是一个很多不同物质的混合物，每种物质都具有不同的熔点。 - Special design of basket die head of for HDPE ( PP, ABS) large diameter pipe with thick wall offer lower melting temperature, good mixing, lower pressure of cavity, and stable production.
特殊设计的HDPE（PP，ABS）篮式膜具，使溶解温度更低，拥有好的混合效果，低的机头压力，并有好的稳定产量。 - Research of Melting Temperature, Melting Range and Isothermal Crystallization of LDPE and LDPE/ TiO_2 Nanocomposites Determined by Dilatometry
LDPE及LDPE/TiO2纳米复合材料的熔限及等温结晶研究 - The ceramics matrix composites can be formed by pseudo-semi-solid thixoforming and the forming temperature was much lower than the melting temperature of the high-melting phase-nano-powder.
用伪半固态触变成形技术能够成形陶瓷基复合材料，成形温度大大低于高熔点相纳米粉体熔化温度。 - 3-D finite element analysis of melting temperature field in hield tunneling horizontal freezing reinforcing engineering
盾构出洞水平冻结解冻温度场三维有限元分析 - Melting temperature distribution characteristic of ash deposits of black liquor coal slurry on furnace wall
黑液水煤浆炉壁灰沉积物熔融温度分布特性 - The heat of fusion is the heat required to melt a substance at its normal melting temperature.
熔化热是一种物质在其熔点温度全部熔化所需要的热量。